HOW TO MAKE A TRACK DOLLY ~ LOW-BUDGET FIMMAKING (UK)

There didn't seem to be much help on this subject on YouTube, so I decided to make a "How-to" video.I just Googled "how to make a track dolly", and some of the sites I originally used to make my track dolly no longer appear to be there.However, Googling "track dolly skateboard wheels" turned up lots of useful sites that should help you.Total cost of the dolly was about £80.Total Dolly size = 2ft wide x 3ft long.Type of pipe used for track = 32mm waste pipe.Angle alluminium width = 2in x 2in at 3mm thick.NOTE: Angle aluminium is a lot easier to work with than angle iron - which is very heavy and hard to drill & cut. It also goes rusty and is generally not much fun to handle.ALSO: Try to get the wheels positioned closer together so they sit on the upper/top portion of the track rather than middle/sides of the track. (Or in other words - go for a small/narrow "L" shape area for the track to sit in)I found wider-spaced wheels were trying to bend the pipe and make the dolly harder & more jerky to push with weight on it. Enjoy & please comment if you watch.Honours:#91 - Most Responded (This Month) - Howto & Style#77 - Most Responded (All Time) - Howto & Style

Channel: Howto & Style
Uploaded: November 30, 1999 at 12:00 am
Author: rickvanman

Length: 09:12
Rating: 4.81
Views: 101044

Tags: build  Camera  dolly  Equipment  film  home  homemade  how  made  make  making  Stabilization  steadicam  steadycam  to  track  tripod  

Video Comments